Commercial Candle Making Equipment Information

Commercial Candle Making Equipment Tips

Too long wick can be a hazard so trim the wick before using. There are some safety tips that must be kept in mind while lighting candles. A good candle holder must be used to hold the candle and it must be kept of a heat-resistant surface. It is very important to keep the candles out of reach of pets and children. Never burn a candle near anything that can catch fire.

While the wax is cooling in the molds, prepare your wicks. Dip the wicks into the hot wax. Attack a wick several inches longer than the mold to a wick tab.

Commercial Candle Making Equipment Advice

The activity of candle making is really quite simple there are just a few basics that you will need to be aware of. You are going to want to weigh your wax before putting it in the meter and when you do this you will break up the wax with a hammer and then put the chunks onto the scale until you reach the appropriate amount. You should always wear protective clothing when making candles, and this includes oven gloves, a heavy apron, long pants, long sleeved shirt, shoes and socks. All you really need to do is melt the wax of your choice, making sure to use a thermometer the entire time so you can keep track of the temperature of the wax.

You can put one color on the bottom with another color on top or even layers of three colors. You can also use only one color. Do not stack as many chunks as you can in the mold or the candle won’t form properly. Using the same molds that are used for pillar candles, insert your candle wick through the bottom of the candle mold. Just toss them in and let them lay where they end up. The choice is all yours. Fill the mold loosely with color chunks.

Commercial Candle Making Equipment Facts

Peak Candle Making Supply
All you really need to do is melt the wax of your choice, making sure to use a thermometer the entire time so you can keep track of the temperature of the wax.

Instructions For Soy Candle Making
Fill the mold loosely with color chunks.

Interesting information on commercial candle making equipment. You can remove your finished candles from the molds as soon as they have completely cooled. Snip the excess wick to about 1/4 inch of the top of the candle. If you allow the wax to start cooling before you pour it the candles will have lumps in them. Come back often as we keep adding new information on a regular basis! We hope these infos and tips about commercialcandlemakingequipment were useful and relevant. Please bookmark us!

Thursday, February 23, 2012

Candle Making Forums